DCRUST: UG-CHE:01-2009
ORDINANCE SCHEME OF STUDIES & EXAMINATION
SYLLABUS
BACHELOR OF TECHNOLOGY (4 Year Degree Programme)
CHEMICAL ENGINEERING (w.e.f. Session 2009-10)
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE AND TECHNOLOGY
MURTHAL (SONIPAT) HARYANA-131039
MAY 2010
Information in this book and more details are available atDeenbandhu Chhotu Ram University of Science and Technology (DCRUST)website: http: //www.dcrustm.org In case of any query, please visitDCRUST website or contact: Deputy Registrar (Academic) Phone:0130-2484153 Fax: 0130-2484005 Email: [emailprotected] CopyRights reserved with DCRUST, Murthal DCRUST: UG-CHE: 01-2009 Firstpublished: May, 2010 Copies printed: 500 Price: Rs. 100/- Printedat Logic Printers, Sonipat
CONTENTS
S. No. Title Pages
1 Ordinance for Credit Based System 1 - 9
2 Scheme of Studies and Examinations
1st Year Semester I 11
Semester II 12
2nd Year Semester III 13
Semester IV 14
3RD Year Semester V 15
Semester VI 16
4th Year Semester VII 17
Semester VIII 18
3 Detailed Syllabus 1st Year Semester I 20 39
Semester II 40 46
2nd Year Semester III 47 56
Semester IV 57 65
3RD Year Semester V 66 75
Semester VI 76 85
4th Year Semester VII 86 107
Semester VIII 108 118
ORDINANCE
1
Deenbandhu Chhotu Ram University of Science & Technology,Murthal (Sonepat) ORDINANCE FOR CREDIT BASED SYSTEM
for BACHELOR OF TECHNOLOGY
(w.e.f. the academic session 2008-09) (Including amendmentsuggested by 2nd meeting of the Academic Council)
1 Preliminaries
1.1 This ordinances shall apply to UG programme in theUniversity Teaching Departments.
UG Programme
Courses Normal duration Extended duration B. Tech. Four Years(08 semesters) Seven Years
An academic year shall consist of two semesters (odd & even)of approximately 20 weeks duration inclusive of the period ofexamination and semester break. The eligibility criteria foradmission to each programme, fee structure, academic calendar,scheme of studies and examinations, examination schedule, sportscalendar and cultural activity calendar etc. for the academic yearshall be published in the prospectus.
2. ORDINANCE: BACHELOR OF TECHNOLOGY
Notwithstanding anything contained in any other ordinance withregard to the matter hereunder, the courses of study for theDegrees of Bachelor of Technology and the conditions for admissionthereto shall be as under:
2.1 The Bachelor of Technology Degree courses shall extend overa minimum period of four academic years. However students will beadmitted on the basis of 3 years diploma directly in the 2nd yearunder the LEET scheme. Teaching in each academic year shall bedivided into two semesters, each semester extending to 20 weeksincluding practical, semester examination and semester break.Teaching for odd semesters will normally be from August to Decemberand for even semesters from January to May.
2.2 At the end of the each semester, there shall be anexamination wherein candidates shall be examined in the coursesstudied by them in that semester. Each semester examination shallbe designated as First Semester Examination, Second SemesterExamination, and Third Semester Examination and so on.
2.3 The Examination for all semester will normally be held inDecember/January and also in May/ June on such dates as may befixed by the Controller of Examination as per the Schedule providedby the University. The date(s) of commencement of examination aswell as the last date(s) for the receipt of examination forms andfees shall also be notified by the controller of Examinations tothe concerned University Teaching Departments.
2.4.1.1 The courses of the study and the subjects ofexaminations shall be as approved by the Academic Council from timeto time. The medium of instructions and Examination shallordinarily be English except otherwise decided by the AcademicCouncil. The question paper will be set in English, exceptotherwise decided by the board of studies concerned and approved bythe Academic Council. Every candidate shall be examined in thesubjects as laid down in the syllabus approved by the AcademicCouncil from time to time. The credits for each subject as also thecontact hours per week will be mentioned in the scheme of studiesapproved by the Academic Council.
Evaluation Process:
a. Major Test (Theory Examination):
Written question papers for the semester examination shall beset by an External/ Internal paper setter appointed by theVice-Chancellor from a panel of examiners submitted by the chairmanof the department duly approved by
2
the BOS of the concerned department and the answer sheets shallgenerally be evaluated by the internal examiners but can beevaluated from outside experts with the permission of theVice-Chancellor. At the most 50% question papers can be set by theexternal examiners. In case a question paper is not received intime from an external examiners or he refuses to set the questionpaper, the paper can be got set from an internal examiner. Theevaluation of answer sheets will be done by the examiners as perthe procedure laid down by the University for the purpose.
b. Practical Examination:
Examination in practical and viva-voce shall be conductedjointly by the external and Internal Examiners appointed by theVice-Chancellor from a panel of examiners submitted by the chairmanof the department duly approved by the BOS of the concerned. If anExternal Examiner is not able to join, alternate examiner(including those of the same University dept) may be appointed bythe Chairperson of the concerned dept. with the intimation to theController of Examinations in the following preferential order:
i) From outside ii) from DCRUST Murthal
c. Sesssionals (Internal Assessment):
Sessional (internal assessment)works shall be evaluated by theteachers of the various subjects based on the work done duringsemester on the basis of the following weightage:
I. For Theory subjects:
i) Minor Test I 30% of the weightage of the sessional
ii) Minor Test-II 30% of the weightage of the sessional
iii) Assignment/Performance in the class 20% of the weightage ofthe sessional
iv) Surprise Quiz/Tutorial Tests (2+2=4) 20% of the weightage ofthe sessional
II. For Practical/Project/Seminar/Drawing:
i) Viva-Voce/ Test 30% of the weightage of the practical
ii) Laboratory Record/Project Report/Seminar 40% of theweightage of the practical
Report/Drawing Sheet
iii) Objective Tests/Multiple Choice Questions 30% of theweightage of the practical
d. General Proficiency
I. Field Work 40% of the weightage
(Technical Activities/ Extra Curricular Activities/ Industrial,Educational tour/Sports/games/community Service/Hostel Activities)(equal weightage of each)
II. Presentation/Viva -Voce 40% of the weightage
III. Faculty Counselor Assignment 20% of the weightage
The I and II components will be evaluated by a committee,preferably interdisciplinary constituted by the Vice-Chancellor onrecommendation of the Dean Academic Affairs. A Faculty Counselorwill be attached to group of students which will remain associatedwith him /her during the entire period of the degree programe inthe University. Each faculty member will serve as a facultycounselor. They will act like a local guardian for the studentsassociated with him / her and will help them in terms of carrierguidance, personal difficulties.
3
Every student has to appear in both the minor tests. If astudent does not take a minor test, he/she shall be awarded zeromarks in that test. The marks obtained insessional/practical/theory/drawing/general proficiency are to besubmitted to the Examination Branch duly signed by the Chairpersonof the department before the close of semester examination or adate fixed by the COE. The examination branch/course coordinatorshall convert the marks in to equivalent grades as per the gradingprocedure.
The examination shall be open to a candidate who:
has attended regularly the prescribed courses of studies for therelevant semester examination in the department recognized by theUniversity for the degree of Bachelor of Technology.
has his/her name submitted to the Controller of Examinations bythe Chairperson of the department.
has a good moral character (certificate be issued by thechairperson of the department concern if required ).
has attended not less than 75% of the total classes held in eachtheory / lab/project/ seminar/ drawing etc. This requirement shallbe fulfilled separately for each subject of study. A deficiency upto 10% may be condoned by the Chairman of the department. A furthercondonation of 5% in attendance may be allowed in severe/Compassionate circ*mstances by the Vice-Chancellor. However it maynot be treated as a matter of right by the students. ( In case astudent fails to fulfill the necessary requirement of theattendance in any subject(s) in any semester , he/ she shall not bepromoted to next semester and will have to repeat that academicsemester in the next academic session along with regularstudents.)
whose result declaration is delayed for no fault of his/her orhas applied for revaluation may attend classes of the next highersemester provisionally at his /her own risk and responsibilitysubject to his/her passing the concerned semester Examination. Sucha candidate shall also be governed by the clause 2.6 given below.In case the candidate fails to pass the concerned SemesterExamination, his / her attendance and studies in the next highersemester in which he /she was allowed to attend classesprovisionally, shall stand cancelled.
2.6 If a candidate, after attending the classes for the courseof studies in the Department either not appeared or having appearedin any semester examination has failed in one or more paper(s) forthat examination, he/she can appear for such paper(s) at subsequentexaminations without attending a fresh course of studies for thatsemester. Such a candidate may, in the meantime, prosecute his /her studies for the next semester(s) and appear in theexamination(s) for the same along with the examination for thelower semester(s).
2.7 The examinations for reappear in any subject(s) in the oddsemester and that of in the even semester shall be held in therespective semesters along with the regular students. In additionto above, examination for reappear in the subjects in odd semesterswill also be held during the even semesters examinations andvice-versa.
A candidate shall be eligible for promotion to (Effective fromsession 2009-10)
5th semester if passed all papers of semester 1st semester.
6th semester if passed all papers of 1st and 2nd semesters.
7th semester if passed all papers of 1st, 2nd and 3rdsemesters.
8th semester if passed all papers of 1st, 2nd, 3rd and 4thsemesters.
A Candidate through LEET Scheme shall be eligible for Promotionto:
5th semester if passed all papers of 3rd semester.
6th semester if passed all papers of 3rd and 4th semesters.
4
7th semester if passed all papers of 3rd, 4th and 5thsemesters.
8th semester if passed all papers of 3rd, 4th, 5th and 6thsemesters.
The amount of Exam/Reappear/ Re-evaluation/ Improvement fee tobe paid by the candidates shall be as prescribed by the Universityfrom time to time. A candidate who has paid dues for the higherclass and is dropped for want of fulfillment of any of the aboveconditions shall not be required to pay his dues again onre-admission after fulfillment of above conditions.
Re-evaluation is permitted only for major tests (Theory course)as per University Rules for Re-evaluation. The Re-evaluation is notpermitted in the Studio Examination or in an examination whichinvolve more than one examiner.
A candidate who is unable to pass the Bachelor of TechnologyCourse within a maximum of seven consecutive academic years fromthe date of his admission shall lose the right to pursue the degreeprogramme. In exceptional cases, mercy chance can be given by theVice-Chancellor to a candidate if he/she applies.
2.8 The minimum passing marks/grade for passing any semesterExamination shall be:
i. 40% in each major test (theory paper).
ii. 40% in each Practical Examination/Viva-Voice Examination
iii. 40% in aggregate of sessionals and end semester theoryexaminations for each theory and practical subject provided that acandidate, who fails to obtain the requisite marks in aggregate ofsessionals and end semester theory examination, shall be requiredto reappear in the concerned subject in the subsequenttheory/practical examination(s) subject to clause 2.7. Suchcandidates will not be required to repeat the sessional (internalassessment) works.
iv. Minimum pass grade in each course is D grade. Grade will beawarded after adding the marks of sessional (internal assessment)and major test/practical examination.
v. Grade D in General Proficiency
vi. SGPA of 4.0
vii Where a course is evaluated on the basis of sessional(internal assessment) marks only i.e. there is no end-semesterexamination, the candidate will be required to secure at least 40%marks to pass the course.
A candidate who fails to obtain the requisite marks/grade in anycourse shall be required to appear in the concerned course in thesubsequent examination(s) as per the clause 2.6&2.7.
2.9 If a candidate has completed his/her degree with a CGPA 6.5and he/she wants to improve his/her grade, he/she may be allowed toimprove by depositing the requisite fee as per the UniversityRules. He/she is allowed to appear in at the most half of thetheory papers only of a semester along with the regular candidatesof that semester and the sessional (internal assessment)part willbe retained. Such opportunity may be given only twice insuccession, subject to the condition that he/she have to completethe degree within 7 consecutive years of his/her registration. Ifthe improved CGPA is less than the original, then the original willbe retained.
2.10 The result of a student at the end of each semesterExamination and after completion of course shall be declared on thebasis of the SGPA & CGPA (cumulative grade point average)obtained by the student. However result of a student admittedthrough LEET SCHEME for the diploma holders will be declared on thebasis of CGPA of the grades obtained by him/ in this Universityonly.
5
2.11 At the end of each semester examination, the COE shallpublish the result, provided that in a case where candidate who waspermitted to take examination for higher semester but has notcleared the lower semester examination his result for the highersemester examination will be declared provisionally. Eachsuccessful candidate shall be issued a copy of the result card onhaving passed the semester examination.
2.12 Notwithstanding the integrated nature of the coursewherever it is spread over more than one academic year, theOrdinance in force at the time a student joins the course shallhold good only for the examination held during or at the end of thesemester and nothing in this Ordinance shall be deemed to debar theUniversity from amending the Ordinance and the amended Ordinance,if any, shall apply to all students whether old or new.
3. SCHOLARSHIP:
Scholarship may be awarded to students as per the terms andconditions stipulated by the funding agencies. However, it shouldbe mentioned in the prospectus.
4. THE CREDIT SYSTEM:
The University has introduced credit system of study for all theUnder Graduate and Post Graduate programs for all the studentsadmitted from the Academic Year 2008-09. The prominent features ofthe credit system are the process of continuous evaluation of astudents performance, and a flexibility to allow the student toprogress at an optimum pace.
Each Academic Program has a certain number of credits whichdescribe its weightage. A students performance is measured by thenumber of credits that he/she has completed satisfactorily. Aminimum grade point average is required to be maintained forsatisfactory progress.
Each subject (component) has a certain number of credits whichreflect its weightage and is normally decided on the basis ofeffective contacts hours. It is mentioned in the scheme of studiesand examinations.
4.1 The semester examination for the odd semesters shallordinarily be held in the month of December/January and for theeven semesters in the month of May/June, on such dates as may befixed by University authority. The concerned teacher/ coursecoordinator should ensure that 100% syllabus is covered in eachsubject before the Semester Examination.
4.2 A faculty member shall be appointed as a course-coordinatorby the Chairperson of the department who shall have the fullresponsibility for conducting the minor tests, coordinating thework of evaluation with other faculty members involved in thecourse and awarding of grades. A common paper will be set for theminor tests of the common courses.
In case of perceptible deviation in the awards given bydifferent teachers of the same course, the course co-ordinator willmoderate the awards by calling meeting of the teachers associated.However, where a single teacher is associated with the course,moderation of awards will be done in consultation with thechairperson of the department.
4.3 For the time being the existing system of centralizedexamination will be followed for conducting the SemesterExamination. However the system may be reviewed as the Universitygrows and more and more number of departments/courses/students areadded to it.
4.4 The marks/grade awarded to a student in any particularsubject will be based on the performance of the student evaluatedthroughout the semester. The syllabus of the minor tests will bewhat is covered in that particular term. The Semester Examinationwill be based on the entire syllabus.
6
4.5 The marks/grades will be displayed on the notice board ofthe department by the Chairperson before forwarding it to theExamination Branch.
4.6 The Chairperson of the department shall forward theawards/grades to the Examination Branch within a week after thesemester ends and examination process starts. The evaluated answersheets of minor tests are to be kept by the course so-ordiantor forat least one year. The Examination Branch will keep the evaluatedanswer sheets of the semester examination for at least oneyear.
5. GRADING SYSTEM:
For the award of grades in a subject, all component-wiseevaluation shall be done in marks. The marks would be converted togrades as per the guidelines given below:
5.1 Award of Grades Based on Absolute Marks
The University will follow system of grading for all(irrespective of no. of students) based on absolute marks (afterapplying moderation if any) as given below:
Range of Marks (%) Grade
90 to 100 A+ 80 to 89 A 70 to 79 B+ 62 to 69 B 55 to 61 C+ 46 to54 C 40 to 45 D Less than 40 F
Note:
(i) The awards/grades shall be submitted by the teacherconcerned through course coordinator to the Chairperson of thedepartment. The awards/grades should be finalized within 7 days ofthe semester examination.
(ii) In case of any difficulty/issue related tocourses/conduct/moderation of awards/grades/reconduct of paper, thematter will be referred to a departmental monitoring committeecomprising of Chairperson, senior most teachers by rotation, coursecoordinator and faculty nominee of the Dean of Faculty. Thecommittee will be headed by the chairperson. The committee, onreceipt of complaint from student or teacher, shall meet at theearliest and will give its decision within one week. The decisionof the committee shall be final.
(iii) The procedure for evaluation and award of grades forprofessional training shall be decided by the respectiveChairman/Chairperson of the department. The candidate shall berequired to submit a comprehensive report within one month ofcompletion the training. Training Report will be completed underthe supervision of the officer of the company/institution underwhose guidance and supervision the training was completed by thecandidate in that company/institute. The candidate will addsupervisors certificate in the beginning of the report stating thatthe report is an out-come of work done by the candidate duringhis/her training.
iv While calculating percentage of marks to award grades, 0.5 orhigher fraction may be raised to the next higher whole number.
5.2 GRADE POINTS:
The grading point of academic performance will be as under:-
7
Academic Performance Grades Grade Points Outstanding A+ 10Excellent A 9 Very Good B+ 8 Good B 7 Average C+ 6 Below Average C5 Marginal D 4 Very Poor F 0 Absent G - Audit Pass AP - Audit FailAF - Incomplete Dissertation X - Note: 1. Pass Grade is Grade D andhigher grades. 2. Grade F is Fail grade.
F Grade
The F grade denotes poor performance, i.e. failing a subject (orsubject component). A student has to reappear in the semesterexamination only, in which he/she obtains F grades, until a passinggrade is obtained, within the stipulated time of completion of thatprogramme.
G Grade
If any student, who is otherwise eligible for appearing in thesemester examination as per the ordinance, but he/she is unable toappear in the semester examination then he /she will be awarded Ggrade. The candidate will be allowed to take up the examinationnext time along with regular students and he /she will be awardedthe grade as per grade system explained above.
AP/AF Grade
These grades are awarded to qualifying/Non-Credit subject(s) (asper scheme supplied by concerned departments). The candidate willnot be eligible for award of degree without qualifying thesecourses.
Continuous Absence
If a student is continuously absent from the Department for morethan four weeks without intimation to the Chairperson ofDepartment, his/her name will be struck off from the roll ofdepartment. The re-admission shall not be allowed to the candidateduring the same academic session.
X Grade
This grade is awarded for incomplete Project work as perguidelines given below and will be converted to a regular grade onthe completion of the Project work and its evaluation.
A student who is unable to complete his/her Project may beawarded an X grade by the Chairman/Chairperson/chairperson on therecommendation of his/her supervisor.
A student who has been awarded X grade shall be required toformally register for the next semester and pay the requisitefee.
X grade will be awarded in exceptional circ*mstances beyondstudents/supervisors control. Normally, the following grounds maybe considered for the award of X grade:
8
(a) Technical reasons/grounds such as Supervisor/equipment notbeing available.
(b) Any other reason to the satisfaction of supervisor.
5.3 Evaluation of Performance
The performance of a student will be evaluated in terms ofCumulative Grade Point Average (CGPA) which is the Grade PointAverage for all the completed semesters at any point of time.
The CGPA is calculated on the basis of all pass grades, exceptaudit courses, obtained in all completed semesters.
Regarding evaluation of performance.
The formula for calculating SGPA is as mentioned below:
SEM
SEM
coursesaudit except subject) ain earned credits(Totalcoursesaudit except
subject) concerned ain marks totalofout points Gradesubject xain earned credits Total(
SGPA
Illustration for calculating SGPA/CGPA:
Ist Semester
Course No. (1)
Course Credits (2)
Grade Awarded (3)
Earned Credits (4)
Grade Points (5)
Point Secured (6)
MALXXX 5 C+ 5 6 30 CSLXXX 4 C 4 5 20 PHLXXX 4 A+ 4 10 40 PHPXXX1.5 B+ 1.5 8 12 MELXXX 4 F 0 0 00 AMLXXX 4 B 4 7 28
Credits registered in the semester (total of column 2) = 22.5Earned Credits in the semester = 18.5 Total of column 4 (total ofcolumn 2 excluding F grade) Point secured in this semester inpassed courses = 130
SGPA = Points secured in passed courses 130 7.027 earned18.5Credits
= =
IInd Semester
Course No. (1)
Course Credits (2)
Grade Awarded (3)
Earned Credits (4)
Grade Points (5)
Point Secured (6)
MALXXX 5 D 5 4 20 EELXXX 5 F 0 0 00 CYLXXX 4 B 4 7 28 CYPXXX 1.5C+ 1.5 6 09 MELXXX 4 A 4 9 36 HULXXX 2 AP 2 N.A. 00 Creditsregistered in the semester (total of column 2) = 21.5 EarnedCredits in the semester =14.5 Total of column 4 (total of column 2excluding F&AP grades)
9
Cumulative Earned Credits (earned credits in previous semestersand current semester) = 18.5+14.5=33.0 Points Secured in thissemester in passed courses = 93 Cumulative points secured (total ofpoint secured in previous semesters and current semester) = 130 +93 = 223
CGPA = 6.757 14.5 18.593 130
coursesaudit excluding credits, earned Cumulative courses passedallin secured points Cumulative
=++
=
Each successful candidate shall be issued a copy of the resultcard on having passed the semester examination.
Regarding Conversion of CGPA into Marks The CGPA if multipliedby 9.5 will give the equivalent marks in %age. Candidates who passall the prescribed subjects for all the semesters, but obtained:-(i) Less than CGPA of 5.26 Pass class (ii) 5.26 CGPA
10
SCHEME
OF
STUDIES AND EXAMINATIONS
11
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 1st YEAR (SEMESTER I) (COMMON FOR ALL BRANCHES) CreditBased Scheme w.e.f. 2008-09
Sr.No.
Course No.
Course Title Teaching Schedule Marks of
Class Work
Exam. Marks Total Marks
Credit Duration of Exam.
L T P Total Theory Practical
1 HUM-101 ESSENTIALS OF COMMUNICATION 3 1 - 4 50 100 - 150 43
2 MATH-101 MATHEMATICS-I 3 2 - 5 50 100 - 150 5 3
3 PHY-101 PHYSICS-I 3 1 - 4 50 100 - 150 4 3
4 ME-103 CH-101
MANUFACTURING PROCESSES (Gr A) CHEMISTRY (Gr - B)
4
3
-
1
- -
4
4
50
50
100
100
- -
150
150
4
4
3
3
5
CSE-101 EE-101
FUNDAMENTALS OF COMPUTER & PROGRAMMING IN C (Gr A)ELECTRICAL TECHNOLOGY (Gr - B)
See AlsoElectronics (BTECH) DCRUST Murthal - [PDF Document]Quiznos 02 2008 FDD - [PDF Document]Fatal miscommunication: English in aviation safety - [PDF Document]US Patent Application for CHANNEL ESTIMATION USING ARTIFICIAL INTELLIGENCE Patent Application (Application #20240179031 issued May 30, 2024)3
3
-
1
- -
3
4
50
50
100
100
- -
150
150
3
4
3
3
6 GES-101 ENVIRONMENTAL STUDIES (Gr - B) 3 - - 3 - 75 - 75* 03
7
ME-101 ME-105
ELEMENTS OF MECHANICAL ENGINEERING (Gr A) ENGINEERING GRAPHICS& DRAWING (Gr - B)
3 -
1 -
-
4
4
4
50
50
100 -
-
100
150
150
4
4
3
3
8 PHY-103 PHYSICS LAB I - - 2 2 25 - 25 50 2 3
9 ME-107 CH-103 WORKSHOP PRACTICE (Gr A) CHEMISTRY LAB (Gr -B)
- -
- -
4 2
4 2
25 25
- -
25 25
50 50
4 2
3 3
10
CSE-103 EE-103
COMPUTER PROGRAMMING LAB (Gr A) ELECTRICAL TECHNOLOGY LAB (Gr -B)
- -
- -
2
2
2
2
25
25
- -
25
25
50
50
2
2
3
3
11 ME-109 ELEMENTS OF MECH. ENGINEERING LAB (Gr A) - - 2 2 25 -25 50 2 3
12 GES-103 ENVIRONMENTAL STUDIES FIELD WORK (Gr - B) - - - - - -25 25* 0 3
TOTAL ( Gr-A / Gr-B) 19/18 5/6 10/10 34/34 400/375 600/500100/175 1100/1050 34/31 *Not included in total marks.
Note: 1. GROUP A will study the subjects ME-101, ME-103,CSE-101, ME-107, CSE-103 and ME-109
GROUP B will study the subjects ME-105, CH-101, EE-101, CH-103,EE-103, GES-101 and GES-103 2. GROUP A includes students ofdisciplines BME, BT, CSE, ECE.
GROUP B includes students of discipline CE, CHE, EE, ME. 3.Environmental Studies (GES-101) and Environmental Studies FieldWork (GES-103) are qualifying courses. 4. Students will be allowedto use nonprogrammable scientific calculator. However, sharing ofcalculator will not be
permitted in the examination.
12
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 1st YEAR (SEMESTER II) (COMMON FOR ALL BRANCHES) CreditBased Scheme w.e.f. 2008-09
Sr.No.
Course No.
Course Title Teaching Schedule Marks of
Class Work
Exam. Marks Total Marks
Credit Duration of Exam.
L T P Total Theory Practical
1
HUM-102 BT -102
COMMUNICATION SKILLS IN ENGLISH (Except BT) BASICS OFBIOTECHNOLOGY (Only BT)
3
3
1
1
- -
4
4
50
50
100
100
- -
150
150
4
4
3
3
2 MATH-102 MATHEMATICS-II 3 2 - 5 50 100 - 150 5 3
3 PHY-102 PHYSICS-II 3 1 - 4 50 100 150 4 3
4 ME-103 CH-101
MANUFACTURING PROCESSES (Gr - B) CHEMISTRY (Gr A)
4
3
-
1
- -
4
4
50
50
100
100
- -
150
150
4
4
3
3
5
CSE-101 EE-101
FUNDAMENTALS OF COMPUTER & PROGRAMMING IN C (Gr - B)ELECTRICAL TECHNOLOGY (Gr A)
3
3
-
1
- -
3
4
50
50
100
100
- -
150
150
3
4
3
3
6 GES-101 ENVIRONMENTAL STUDIES (Gr A) 3 - - 3 - 75 - 75* 03
7
ME-101 ME-105
ELEMENTS OF MECH. ENGINEERING (Gr - B) ENGINEERING GRAPHICS& DRAWING (Gr A)
3 -
1 -
-
4
4
4
50
50
100 -
-
100
150
150
4
4
3
3
8 PHY-104 PHYSICS LAB II - - 2 2 25 - 25 50 2 3
9 ME-107 CH-103
WORKSHOP PRACTICE (Gr - B) CHEMISTRY LAB (Gr A)
- -
- -
4 2
4 2
25 25
- -
25 25
50 50
4 2
3 3
10
CSE-103 EE-103
COMPUTER PROGRAMMING LAB (Gr - B) ELECTRICAL TECHNOLOGY LAB (GrA)
- -
- -
2
2
2
2
25
25
- -
25
25
50
50
2
2
3
3
11 ME-109 ELEMENTS OF MECH. ENGG. LAB (Gr - B) - - 2 2 25 - 2550 2 3
12 GES-103 ENVIRONMENTAL STUDIES FIELD WORK (Gr A) * - - - - 2525* 0 3
13 GP-102 GENERAL PROFICIENCY - - - - 50 - - 50 2 - TOTAL (Gr-B/Gr-A) 19/18 5/6 10/10 34/34 400/375 600/500 100/175 1100/105034/31
* Not included in total marks. Note:
1. GROUP A will study the subjects ME-105, CH-101, EE-101,CH-103, EE-103, GES-101 and GES-103. GROUP B will study thesubjects ME-101, ME-103, CSE-101, ME-107, CSE-103 and ME-109.
2. GROUP A includes students of disciplines BME, BT, CSE, andECE. GROUP B includes students of disciplines CE, CHE, EE, ME.
3. Environmental Studies (GES-101) and Environmental StudiesField Work (GES-103) are qualifying courses. 4. Students will beallowed to use non-programmable scientific calculator. However,sharing of calculator will not be
permitted in the examination.
13
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 2nd YEAR (SEMESTER III) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2009-10
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 HUM-201 ECONOMICS (COMMON FOR ALL BRANCHES) 3 1 - 4 50 100 -150 4 3
2 MATH-201
MATHEMATICS III (COMMON FOR ALL BRANCHES)
3 2 - 5 50 100 - 150 5 3
3 ECE-211 ELECTRONICS ENGINEERING (CE, CHE, ME)
3 1 - 4 50 100 - 150 4 3
4 CHE-201 CHEMICAL ENGINEERING PROCESS CALCULALTIONS
3 1 - 4 50 100 - 150 4 3
5 CHE-203 FLUID FLOW 3 1 - 4 50 100 - 150 4 3 6 CH-201 ORGANICCHEMISTRY 3 1 - 4 50 100 - 150 4 3 7 CHE-205 FLUID FLOW LAB - - 2 225 - 25 50 2 3
8 CH-203 ORGANIC CHEMISTRY LAB - - 3 3 25 - 25 50 3 3
9 EE-231 ELECTRICAL WORKSHOP (CHE,EE,ECE) - - 2 2 25 - 25 50 23
10 ECE-231 ELECTRONIC ENGINEERING LAB (CE, CHE, ME)
- - 2 2 25 - 25 50 2 3
TOTAL 18 7 9 34 400 600 100 1100 34
Note: 1. Students will be allowed to use non- programmablescientific calculator. However, sharing of calculator will not bepermitted in the examination.
14
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 2nd YEAR (SEMESTER IV) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2009-10
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 HUM-202 FUNDAMENTALS OF
MANAGEMENT (CE, CHE, EE, ECE, ME)
3 1 - 4 50 100 - 150 4 3
2 MATH-202
NUMERICAL METHODS (CHE,EE,ECE)
3 1 - 4 50 100 - 150 4 3
3 CHE-202 TRANSPORT PHENOMENA
4 2 - 6 100 100 - 200 6 3
4 CHE-204 MECHANICAL OPERATIONS
3 2 - 5 75 100 - 175 5 3
5 CHE-206 MATERIAL TECHNOLOGY
4 1 - 5 75 100 - 175 5 3
6 CH-202 UNIT PROCESSES 3 1 - 4 50 100 - 150 4 3
7 CHE-208 MECHANICAL OPERATIONS LAB
- - 3 3 50 - 50 100 3 3
8 MATH-204
NUMERICAL METHODS LAB (CHE ,EE,ECE)
- - 2 2 25 - 25 50 2 3
9 GPCHE-202
GENERAL PROFICIENCY
- - - - 50 - - 50 2 -
TOTAL 20 8 5 33 525 600 75 1200 35
Note: 1. Students will be allowed to use non-programmablescientific calculator. However, sharing of calculator will not bepermitted in the examination. 2. Each student has to undergoProfessional training of at-least 4 weeks from the industry,institute, research lab, training center etc during summer vacationand its evaluation shall be carried out in the V semester.
15
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 3rd YEAR (SEMESTER V) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2010-11
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 CHE-301 CHEMICAL REACTION ENGINEERING-I
3 1 - 4 50 100 - 150 4 3
2 CHE-303 CHEMICAL TECHNOLOGY-I
3 1 - 4 50 100 - 150 4 3
3 CHE-305 EQUIPMENT DESIGN 3 1 - 4 50 100 - 150 4 3 4 CHE-307MASS TRANSFER-I 3 1 - 4 50 100 - 150 4 3 5 CHE-309 HEAT TRANSFER 31 - 4 50 100 - 150 4 3
6 CHE-311 CHEMICAL
ENGINEERING THERMODYNAMICS
3 1 - 4 50 100 - 150 4 3
7 CHE-313 CHEMICAL TECHNOLOGY-I LAB
- - 3 3 25 - 25 50 3 3
8 CHE-315 MASS TRANSFER-I LAB. - - 2 2 25 - 25 50 2 3 9 CHE-317HEAT TRANSFER LAB - - 2 2 25 - 25 50 2 3
10 CHE-319 PROFESSIONAL TRAINING-I
- - 2 2 50 - - 50 2 -
TOTAL 18 6 9 33 425 600 75 1100 33
Note: 1. Students will be allowed to use non- programmablescientific calculator. However, sharing of calculator will not bepermitted in the examination. 2. Assessment of ProfessionalTraining-I undergone at the end of IV semester, will be based onseminar, viva-voce, report and certificate of professional trainingobtained by the student from the industry, institute, research lab,training centre etc.
16
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 3rd YEAR (SEMESTER VI) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2010-11
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 CHE-302 CHEMICAL REACTION ENGINEERING-II
3 1 - 4 50 100 - 150 4 3
2 CHE-304 CHEMICAL TECHNOLOGY-II
3 1 - 4 50 100 - 150 4 3
3 CHE-306 PROCESS UTILITIES 3 1 - 4 50 100 - 150 4 3 4 CHE-308MASS TRANSFER-II 3 1 - 4 50 100 - 150 4 3
5 CHE-310 PROCESS INSTRUMENTATION
3 1 - 4 50 100 - 150 4 3
6 CHE-312 PROCESS EQUIPMENT DESIGN
3 1 - 4 50 100 - 150 4 3
7 CHE-314 CHEMICAL TECHNOLOGY-II LAB
- - 3 3 25 - 25 50 3 3
8 CHE-316 MASS TRANSFER-II LAB - - 3 3 50 - 50 100 3 3
9 CHE-318 CHEMICAL REACTION ENGINEERING-II LAB
- - 3 3 50 - 50 100 3 3
10 GPCHE-302
GENERAL PROFICIENCY
- - - - 50 - - 50 2 -
TOTAL 18 6 9 33 475 600 125 1200 35
Note: 1. Students will be allowed to use non- programmablescientific calculator. However, sharing of calculator will not bepermitted in the examination. 2. Each student has to undergoProfessional training of 4 weeks from the industry, institute,research lab, training center etc during summer vacation and itsevaluation shall be carried out in the VII semester.
17
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 7th YEAR (SEMESTER VII) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2011-12
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 CHE-401 PETROLEUM ENGINEERING
3 1 - 4 50 100 - 150 4 3
2 CHE-403 PROCESS DYNAMICS AND CONTROL
3 1 - 4 50 100 - 150 4 3
3 CHE-405 ENERGY TECHNOLOGY 3 1 - 4 50 100 - 150 4 3 4 - OPENELECTIVE* 4 - - 4 50 100 - 150 4 3
5 CHE-407 POLYMER SCIENCE & ENGINEERING
3 1 - 4 50 100 - 150 4 3
6 CHE-409 PROCESS DYNAMICS AND CONTROL LAB
- - 3 3 50 - 50 100
3 3
7 CHE-411 ENERGY TECHNOLOGY LAB
- - 2 2 25 - 25 50 2 3
8 CHE-415 PROFESSIONAL TRAINING-II
- - 2 2 50 - - 50 2 -
9 CHE-417 PROJECT - - 4 4 50 - - 50 4 - TOTAL 16 4 11 31 425 50075 1000 31
List of Open Electives: 1. HUM-451 LANGUAGE SKILLS FOR
ENGINEERS 8 CSE-409 ARTIFICIAL INTELLIGENCE & EXPERT
SYSTEMS 2. HUM-453 HUMAN RESOURCE
MANAGEMENT 9 CSE-301 PRINCIPLES OF OPERATING SYSTEMS
3. HUM-455 ENTREPRENEURSHIP 10 EE-455 INTELLIGENTINSTRUMENTATION FOR ENGINEERS
4. HUM-457 BUSINESS COMMUNICATION 11 ECE-403 EMBEDDED SYSTEMS& DESIGN 5. PHY-451 NANO TECHNOLOGY 12 CH-453 POLLUTION &CONTROL 6. PHY-453 LASER TECHNOLOGY 13 CSE-411 MANAGEMENTINFORMATION SYSTEM 7. ME-451 MECHATRONICS SYSTEMS 14 CSE-308MULTIMEDIA TECHNOLOGIES Note: 1. Students will be allowed to usenon- programmable scientific calculator. However, sharing ofcalculator will not
be permitted in the examination. 2. Students will be permittedto opt for any one elective run by the other department. However,the departments will offer those elective for which they haveexpertise. The choice of the students for any elective shall not bea binding for the department to offer, if the department does nothave expertise. 3. Assessment of Professional Training-II undergoneat the end of VI semester will be based on seminar, viva-voce,report and certificate of professional training obtained by thestudent from the industry, institute, research lab, training centreetc. 4. Project coordinator will be assigned the load of, maximumof 2 hours per week including his own guiding load of one hr.However, the guiding teacher will be assigned maximum of one periodof teaching load irrespective of number of students/groups underhim/her. Project will commence in 7th semester where the studentwill identify the project problem, complete design, procure thematerial, start the fabrication, complete the survey etc. dependingupon the nature of problem. Project will continue in nextsemester.
18
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY,MURTHAL (SONEPAT) SCHEME OF STUDIES & EXAMINATIONS
B. Tech. 8th YEAR (SEMESTER VIII) (CHEMICAL ENGINEERING) CreditBased Scheme w.e.f. 2011-12
S. No.
Course No.
Course Title
Teaching Schedule Marks
of Class work
Examination Marks
Total Credit Duration of Exam L T P Total Theory Practical
1 CHE-402 PROCESS MODELLING & SIMULATION
3 1 - 4 50 100 - 150 4 3
2 CHE-404 PROCESS ENGINEERING ECONOMICS
3 1 - 4 50 100 - 150 4 3
3 - ELECTIVE-I (DEPARTMENTAL)
4 - - 4 50 100 - 150 4 3
4 - ELECTIVE-II (DEPARTMENTAL)
4 - - 4 50 100 - 150 4 3
5 CHE-408 SEMINAR - - 2 2 50 - - 50 2 -
6 CHE-410
ENVIRONMENTAL POLLUTION&CONTROL LAB
2
2
25
-
25
50
2
3
7 CHE-414 MODELLING AND SIMULATION LAB
- - 2 2 25 - 25 50 2 3
8 CHE-417 PROJECT - - 8 8 50 - 100 150 8 3
9 GFCHE-402
GENERAL FITNESS FOR THE PROFESSION
- - - - - - 100 100 4 3
TOTAL 14 2 14 30 350 400 250 1000 34
Departmental Elective-I 1. CHE-451 ENVIRONMENTAL POLLUTION &CONTROL
2. CHE-453 INTRODUCTION TO BIO-CHEMICAL ENGINEERING.
Departmental Elective-II 1. CHE-452 NOVEL SEPARATION TECHNIQUES2. CHE-454 DESIGN OF PIPING SYSTEMS.
Note: 1. Students will be allowed to use the non-programmablescientific calculator. However, sharing of calculator will
not be permitted in the examination. 2. Project coordinator willbe assigned the project load of maximum of 2hrs per week includinghis own guiding load of one hr. However, the guiding teacher willbe assigned maximum of one period of teaching load irrespective ofnumber of students/groups under him/ her. Project involving design,fabrication, testing, computer simulation, case studies etc. whichhas been commenced by the students in VII semester will becompleted in VIII semester 3. For the course CHE-408 Seminar, astudent will select a topic from emerging areas of Engineering andTechnology and study it independently. Student will give a seminartalk on the topic. 4. The evaluation of the students for his/herGeneral Fitness for the Profession shall be carried out by a teamconsisting Dean of Faculty, Chairperson of Department and externalexaminer appointed by University.
19
SYLLABUS
20
HUM 101 ESSENTIALS OF COMMUNICATION B. Tech. Semester - I(Common for all Branches)
L T P Credits Class Work : 50 Marks 3 1 -- 4 Examination : 100Marks Total : 150 Marks Duration of Examination : 3 Hours
The course aims at inculcating a minimum level of languageproficiency among students of Engineering and Technology. Thepurpose is to sensitize them to the nuances of English and itsapplications for various communication needs.
COURSE CONTENT:
Unit-I: Semantics: Synonyms, Antonyms, hom*ophones, hom*onyms,Form and function of words
Unit-II: Syntax: Sentence structures, Verb patterns and theirusage
Unit-III: Phonetics: Basic Concepts Vowels, Consonants,Phonemes, Syllables; Articulation of Speech Sounds Place and Mannerof Articulation; Transcription of words and simple sentences, usingInternational Phonetic Alphabet.
Unit-IV: Comprehension: Listening and Reading comprehension Notetaking, Reviewing, Summarising, Interpreting, Paraphrasing andPrcis Writing.
Unit-V: Composition: Descriptive, Explanatory, Analytical andArgumentative Writing - description of simple objects likeinstruments, appliances, places, persons, principles; descriptionand explanation of processes and operations; analysis and argumentsin the form of debate and group discussion
Unit-VI: Text: English for Students of Science by A.Roy and P.L.Sharma (Orient Longman)
Chapters for Study:
i) "The year 2050" by Theodore J. Gordon.
ii) "The Mushroom of Death" by A. Bandhopadhyay.
iii) "The Discovery" by Herman Ould.
The prescribed text will be used as a case study for variouscomponents of the syllabus.
Unit-VII (For Internal Evaluation Only): Book Review Herein thestudents will be required to read and submit a review of a book(Literary or non-literary) of their own choice. This will befollowed by a presentation of the same in the class.
TEXT BOOKS:
1. English for Students of Science edited by A. Roy and P.L.Sharma, Orient Longman. 2. Spoken English for India by R.K. Bansaland J.B. Harrison, Orient Longman. 3. Intermediate Grammar, Usageand Composition by M.L. Tickoo and A.E. Subramanian, OrientLongman.
SUGGESTED READING:
1. English Grammar, Composition and Correspondence by M.A. Pinkand S.E. Thomas, S. Chand and Sons Pvt. Ltd.,Delhi.
2. A Practical English Grammar by Thomson and Martinet, OUP,Delhi. 3. Guide to Patterns and Usage in English by A.S. Hornby,OUP, Delhi. 4. A Textbook of English Phonetics for Indian Studentsby T. Balasubramanian, MacMillan, Chennai. 5. Better EnglishPronunciation by J.D.OConnor, Cambridge Univ. Press, London. 6.English Vocabulary in Use by McCarthy, Foundation Books (CambridgeUniversity Press), Delhi.
21
7. Assessing Listening by Buck, Foundation Books (CambridgeUniversity Press), Delhi. 8. Reading Between the Lines by McRae,Foundation Books (Cambridge University Press), Delhi.
SCHEME OF EXAMINATION:
There will be seven questions in all covering all the units,except Unit VII which (besides other modes of internal evaluation)is for internal assessment only.
All questions will be compulsory and will have sufficientinternal choice.
Unit-I: 15 Marks
The question will be set so as to evaluate the following: Usageof the words given, Changing the grammatical quality and functionof the words, One word Substitutes, synonyms, antonyms, hom*ophones,hom*onyms.
Unit-II: 20 Marks
There will be one question having different parts. The questionshould test students knowledge of sentence structures and verbpatterns. The question can be in the nature of Do as directed,Tracing and rectifying structural
Errors, Elucidating patterns through sentences and vice-versa,Changing the word-order, Synthesizing the sentences and Completingthe sentences, etc.
Unit-III: 15 Marks
There will be two questions from this Unit. Question one will bein the nature of short notes testing the basic concepts andarticulation of speech sounds. The second question would requiretranscription of individual words and simple sentences.
Unit-IV: 15 Marks
Comprehension and Interpretation of a passage given (Literary ornon-literary, newspaper article, story, extract from a speechetc.), will be judged for its vocabulary, general understanding andinterpretation of the content in the form of question answerexercise, culling out important points, suggesting a suitabletopic/title, summarising and prcis writing etc.
Unit-V: 15 Marks
The question will require the definition, description, analysis,explanation of various objects and processes. Bedsides, a topic ofcontemporary relevance may be given for writing a paragraph in anyone of the writing forms prescribed in the unit.
Unit-VI: 20 Marks
There will be two questions from the text prescribed. The firstquestion will evaluate the comprehension of the text through shortanswer questions or a long answer question.
The second question will judge the linguistic aspect of the textsuch as using a particular word in its various syntactic forms likenoun, adjective, verb etc.; matching the lists of words and theirexplanation; providing opposite/similar meanings, adding suffixesand prefixes etc.
22
MATH 101 MATHEMATICS - I B. Tech. Semester - I (Common for allBranches)
L T P Credits Class Work : 50 Marks 3 2 -- 5 Examination : 100Marks Total : 150 Marks Duration of Examination : 3 Hours
Part - A
Infinite series: Convergence and divergence, Comparison, D'Alembert's ratio, Integral, Raobes, Logrithmic and Cauchy roottests, Alternating series, Absolute and conditionalconvergence.
Applications of Differentiation: Taylor's and Maclaurin'sseries, Asymptotes, Curvature Asymptotes.
Partial Differentiation & its Applications: Functions of twoor more variables; partial derivatives, Total differential anddifferentiability, Derivatives of composite and implicit functions,Jacobians, Higher order partial derivatives.
hom*ogeneous functions, Euler's theorem, Taylor's series forfunctions of two variables (without proof), maxima-minima offunction of two variables, Lagrange's method of undeterminedmultipliers, Differentiation under integral sign.
Part - B
Applications of Single & Multiple Integration: Applicationsof single integration to find volume of solids and surface area ofsolids of revolution. Double integral, change of order ofintegration, Double integral in polar coordinates, Applications ofdouble integral to find area enclosed by plane curves and volume ofsolids of revolution.
Triple integral, volume of solids, change of variables, Beta andgamma functions and relationship between them.
Vector Calculus : Differentiation of vectors, scalar and vectorpoint functions Gradient of a scalar field and directionalderivative, divergence and curl of a vector field and theirphysical interpretations.
Integration of vectors, line integral, surface integral, volumeintegral, Green, Stoke's and Gauss theorems (without proof) andtheir simple applications.
TEXT BOOKS:
1. Advanced Engineering Mathematics : F. Kreyszig. 2. HigherEngineering Mathematics : B.S. Grewal.
REFERENCE BOOKS:
1. Engineering Mathematics Part-I: S.S. Sastry. 2. Differentialand Integral Calculus: Piskunov. 3. Advanced EngineeringMathematics: R.K. Jain and S.R.K. Iyengar 4. Advanced Engg.Mathematics: Michael D. Greenberg Note: Examiner will set eightquestions, taking four from Part-A and four from Part-B. Studentswill be required to
attempt five questions taking at least two from each part.
23
PHY - 101 PHYSICS - I B. Tech. Semester - I (Common for allBranches)
L T P Credits Class Work : 50 Marks 3 1 -- 4 Examination : 100Marks Total : 150 Marks Duration of Examination : 3 Hours
Part - A
PHYSICAL OPTICS
Interference: Division of wave front-Fresnel's biprism, Divisionof amplitude Newton's rings, Michelson interferometer,applications.
Diffraction: Difference between Fraunhofer and Fresneldiffraction. Fraunhofer diffraction through a slit. Planetransmission diffraction grating, its dispersive and resolvingpowers.
Polarization : Polarised and unpolarized light, doublerefraction; Nicol prism, quarter and half wave plates,Polarimetry;Biquartz and Laurent's half-shade polarimeters, Simple concepts ofphotoelasticity.
LASER: Spontaneous and stimulated emissions, Laser action,characteristics of laser beam-concepts of coherence, He-Ne andsemiconductor lasers (simple ideas), applications.
FIBRE OPTICS: Propagation of light in fibres, numericalaperture, single mode and multi mode fibres, applications.
Part - B
WAVE AND OSCILLATIONS: Simple concepts of Harmonic Oscillator,resonance, quality factor.
E.M. wave theory-review of basic ideas, Maxwell's equations,simple plane wave equations, simple concepts of wave guides andco-axial cables, Poynting vector.
DIELECTRICS: Molecular theory, polarization,displacement,susceptibility, dielectric coefficient, permitivity& various relations between these, Gauss's law in the presenceof a dielectric, Energy stored in an electric field. Behaviour ofdielectrics in a.c. field-simple concepts, dielectric losses.
SPECIAL THEORY OF RELATIVITY: Michelson-Moreley experiment,Lorentz transformations, variation of mass with velocity, massenergy equivalence.
NUCLEAR PHYSICS: Neutron Cross-section, Nuclear fission,Moderators, Nuclear reactors, Reactor criticality, Nuclear fusion.Interaction of radiation with matter-basic concepts, radiationdetectors-ionisation chamber, G.M. Counter, Scintillation and solidstate detectors, cloud chamber and bubble chamber.
TEXT BOOKS:
1. Physics of the Atom - Wehr, Richards & Adair (Narosa) 2.Perspectives of Modern Physics - Arthur Beiser (TMH) 3. ModernEngineering Physics A.S. Vasudeva (S. Chand)
REFERENCE BOOKS :
1. Electricity and Magnetism F.W. Sears (Narosa) 2. PhysicsVol-I & II Resnick & Halliday (Wiley Eastern) 3. A TextBook of Optics Brij Lal & Subramanyam
Note: The Examiners will set eight questions, taking four fromeach part. The students will be required to attempt five questionsin all selecting at least two from each part. All questions willcarry equal marks.
24
ME - 103 MANUFACTURING PROCESSES B. Tech. Semester I/II (Commonfor all Branches)
L T P Credits Class Work : 50 Marks 4 -- -- 4 Examination :100Marks Total : 150 Marks Duration of Examination : 3 Hours
Unit-I Introduction: Introduction to Manufacturing Processes andtheir Classification. Industrial Safety; Introduction, Types ofAccidents, Causes and Common Sources of Accidents, Methods ofSafety, First Aid.
Unit-II Engineering Materials: General Properties andApplications of Engineering Materials, Mild Steel, Medium CarbonSteel, High Carbon Steel, High Speed Steel and Cast Iron.
Unit-III Foundry: Introduction to Casting Processes, Basic Stepsin Casting Process, Pattern, Types of Patterns, Pattern Allowances,Risers, Runners, Gates, Moulding Sand and its composition, SandPreparation, Molding Methods, Core Sands and Core Making, CoreAssembly, Mold Assembly, Melting ( Cupola) and Pouring, Fettling,Casting Defects and Remedies.
Unit-IV Cold Working ( Sheet Metal Work ): Sheet MetalOperations, Measuring, Layout Marking, Shearing, Punching,Blanking, Piercing, Forming, Bending and Joining - Advantages andLimitations.
Hot Working Processes: Introduction to Hot Working, Principlesof Hot Working Processes, Forging, Rolling, Extrusion, WireDrawing..
Unit-V Introduction to Machine Tools: Specifications and Uses ofcommonly used Machine Tools in a Workshop such as Lathe, Shaper,Planer, Milling, Drilling, Slotter, Introduction to Metal Cutting.Nomenclature of a Single Points Cutting Tool and Tool Wear.Mechanics of Chips Formation, Type of Chips , Use of Coolants inmachining.
Unit-VI Welding: Introduction to Welding, Classification ofWelding Processes, Gas Welding: Oxy-Acetylene Welding, ResistanceWelding; Spot and Seam Welding, Arc Welding: Metal Arc, TIG &MIG Welding, Welding Defects and Remedies, Soldering &Brazing.
Unit-VII Plant Layout, Objectives of Layout, Types of PlantLayout and their Advantages.
TEXT BOOKS:
1. Workshop Technology Vol. I & II - Hazra & Chaudhary,Asian Book Comp., New Delhi. 2. Process and Materials ofManufacture -- Lindberg, R.A. Prentice Hall of India,New Delhi. 3.Principles of Manufacturing Materials and Processes - Campbell,J.S.- McGraw- Hill.
REFERENCE BOOKS:
1. Manufacturing Science - Amitabha Ghosh & Ashok KumarMalik, - East-West Press. 2. Manufacturing Process and Systems -Ostwald, Munoz , John Wiley. 3. Workshop Technology, Vol. 1, 2& 3 Chapman, WAJ, Edward Arnold.
Note: In the semester examination, the examiner will set eightquestions, at least one question from each unit. The students willbe required to attend only 5 questions.
25
CH - 101 CHEMISTRY
B. Tech. Semester I/II (Common for all Branches) L T P CreditsClass Work : 50 Marks 3 1 -- 4 Examination : 100 Marks Total : 150Marks Duration of Examination : 3 Hours
Unit-1: Thermodynamics - Second law, concept of Entropy, Entropychange for an ideal gas, free energy and work functions, Freeenergy change, Chemical Potential, Gibb's Helmholtz equation,Clausius - Clapeyron equation, Related numerical problems withabove topics.
Unit-2: Phase-Rule - Terminology, Derivation of Gibb's PhaseRule Equation, One Component System (H2O System), Two Componentssystems, Eutectic system (Pb-Ag), system with congruent m.pt.(Zn-Mg), systems with incongruent m.pt. (Na-K), Applications ofabove Systems.
Unit-3: Water & its treatment : Part I Sources of water,impurities in water, hardness of water and its determination, unitsof hardness, alkalinity of water and its determination, Relatednumerical problems, scale and sludge formation (compositionproperties and methods of prevention).
Unit-4: Water and its treatment : Part II Treatment of water fordomestic use, coagulation, sedimentation, filtration anddis-infection, water softening, ion-exchange process, mixed beddemineralisation, Desalination (reverse osmosis)(electrodialysis).
Unit-5: Corrosion and its prevention - Galvanic &concentration cell, Dry and wet corrosion, Electrochemical theoryof corrosion, Galvanic corrosion, pitting corrosion, water-linecorrosion, differential aeration corrosion, stress corrosion,factors affecting corrosion, Preventive measures (proper design,Cathodic protection, protective coatings).
Unit-6: Lubrication and Lubricants - Friction, mechanism oflubrication, classification and properties of lubricants, Additivesfor lubricants, synthetic lubricants, Greases Preparation &properties (consistency, drop point) and uses.
Unit-7: Polymers and Polymerization - Organic polymers,polymerisation, various types of polymerisation, effect ofstructure on properties of polymers, preparation properties andtechnical applications of thermo-plastics (PVC, PVA), thermosets(PF,UF), & elastomers (SBR,GR-N), Silicones, Introduction topolymeric compsites.
Unit-8: Analytical Methods - Thermal methods, Principle, methodand application of Thermogravimetric analysis, Differential thermalanalysis and Differential scanning calorimetry , (Experimentaldetails are excluded),Spectroscopic methods, Spectrophotometry,interaction of E.M. radiations with a molecule and origin ofspectrum, spectroscopic, techniques-vibrational and electronicspectroscopy (Experimental details are excluded), conductometrictitration, elementary discussion on Flame-photometry.
TEXT BOOKS:
1. Engineering Chemistry, P.C. Jain, Monica Jain (Dhanpat Rai& Co.). 2. Chemistry in Engineering & Tech., Vol.I &II, Rajaram, Kuriacose (TMH).
REFERENCE BOOKS:
1. Instrumental methods of Chemical Analysis, MERITT &WILLARD East-West Press). 2. Physical Chemistry, P.W. Atkin (ELBS,Oxford Press). 3. Physical Chemistry, W.J. Moore(Orient-Longman).
Note: Eight questions are to be set with a fair weightage of allthe units. The candidates will be required to attempt fivequestions in all.
26
CSE - 101 FUNDAMENTALS OF COMPUTER & PROGRAMMING IN C B.Tech. Semester I/II (Common for all Branches)
L T P Credits Class Work : 50 Marks 3 -- -- 3 Examination : 100Marks Total : 150 Marks Duration of Examination : 3 Hours
Unit-1: An Overview of Computer System: Anatomy of a digitalComputer, Memory Units, Main and Auxiliary Storage Devices, InputDevices, Output Devices, Classification of Computers.
Radix number system: Decimal, Binary, Octal, Hexadecimal numbersand their inter-conversions; Representation of information insidethe computers.
Unit-2: Operating System Basics: The user Interface, RunningProgrammes, Managing files, Introduction to PC operating Systems:Unix/Linux , DOS, Windows 2000.
Unit-3: Internet basics: : Introduction to the basic concepts ofNetworks and Data Communications, How Internet works, Majorfeatures of internet, Emails, FTP, Using the internet.
Unit-4: Programming Languages: Machine-, Assembly-, High Level-Language, Assembler, Compiler, Interpreter, debuggers, Programmingfundamentals: problem definition, algorithms, flow charts and theirsymbols, introduction to compiler, interpreter, assembler, linkerand loader and their inter relationship.
Unit-5: C Programming language: C fundamentals, formatted input/output, expressions, selection statements, loops and theirapplications; Basic types, arrays, functions, including recursivefunctions, program organization: local and external variables andscope; pointers & arrays.
Unit-6: Strings: strings literals, string variables, I/O ofstrings, arrays of strings; applications. Preprocessor:preprocessor directives, macro definition, conditional compilation;Structures, Unions and Enumerations: Structure variables andoperations on structures; Structured types, nested arraystructures; unions; enumeration as integers, tags and types.
Declaration: Declaration syntax, storage classes, typesqualifiers, declarators, initializers.
Program Design: modules, information hiding, abstract datatypes, difference between C & C++, Low level programming:Bitwise operators, Bit fields in structures, other low leveltechniques.
Unit-7: Standard library: Input / output; streams, fileoperations, formatted I/O, character I/O, line I/O, block, stringI/O, Library support for numbers and character data, errorhandling:
TEXT BOOKS:
1. Using Information Technology, 5th Edi, Brian K Williams &Stacey C. Sawyer, 2003, TMH 2. The C Programming Language by DennisM Ritchie, Brian W. Kernigham, 1988, PHI. 3. C Programming A modernapproach by K.N. King, 1996, WW Norton & Co.
REFERENCE BOOKS:
1. Information technology, Dennis P. Curtin, Kim Foley, KunalSen, Cathleen Morin, 1998, TMH 2. Theory and problem of programmingwith C, Byron C Gottfried, TMH 3. Teach yourself all aboutcomputers by Barry Press and Marcia Press, 2000, IDG Books India.4. Using Computers and Information by Jack B. Rochester, 1996, QueEducation & Training.
Note: Eight questions will be set by the examiner (at least 2questions from unit-1 to 4, 2 each from unit 5 & 6, and
one from unit-7). The students will be required to attempt 5questions in all.
27
EE - 101 ELECTRICAL TECHNOLOGY B. Tech. Semester I/II (Commonfor all Branches)
L T P Credits Class Work : 50 Marks 3 1 -- 4 Examination : 100Marks Total : 150 Marks Duration of Examination : 3 Hours
Unit-I: D.C. CIRCUITS: Ohms Law, Kirchoffs Laws, D.C. Circuits,Nodal and Loop methods of analysis.
Unit-II: a) A.C. CIRCUITS: Sinusoidal signal, instantaneous andpeak values, RMS and average values, phase angle, polar &rectangular, exponential and trigonometric representations; R,L andC components, behaviors of these components in A.C. circuits.Concept of complex power, power factor.
b) TRANSIENT RESPONSE: Transient response of RL, RC and RLCCircuits with step input.
Unit- III: NETWORK THEOREMS: Thevenins theorem, Nortons theorem,superposition theorem, maximum power transfer theorem, Reciprocitytheorem, Tellegens theorem, Milman's theorem. Star to Delta &Delta to Star transformation.
Unit-IV: SERIES AND PARALLEL A.C. CIRCUITS: Series and parallelA.C. circuits, series and parallel resonance, Q factor, cut-offfrequencies and bandwidth.
Unit-V: THREE PHASE CIRCUITS: Phase and line voltages andcurrents, balanced star and delta circuits, power equation,measurement of power by two wattmeter method, Importance ofearthing.
Unit-VI: TRANSFORMERS: Principle, construction & working oftransformer, Efficiency and regulation.
Unit-VII: ELECTRICAL MACHINES: Introduction to D.C. Machines,Induction motor, Synchronous machines.
Unit-VIII: MEASURING INSTRUMENTS: Voltmeter, Ammeter, Wattmeter, Energy meter.
TEXT BOOKS:
1. Basic Electrical Engg (2nd Edition) : Kothari & Nagarath,TMH 2. Electrical Technology (Vol-I) : B.L Theraja & A KTheraja, S.Chand
REFERENCE BOOKS:
1. Electrical Engineering Fundamentals: Deltoro, PHI 2. NetworkAnalysis: Valkenburg, PHI
Note: Eight questions are to be set in all by the examinertaking at least one question from each unit. Students will berequired to attempt five questions in all.
28
GES - 101 ENVIRONMENTAL STUDIES B. Tech. Semester I/II (Commonfor all Branches)
L T P Credits Examination : 75Marks 3 -- -- 0 Total : 75 MarksDuration of Examination : 3 Hours
UNIT I The Multidisciplinary nature of environmental studies,Definition, scope and importance.
Need for Public awareness
UNIT II Natural Resources:
Renewable and non-renewable resources:
Natural resources and associated problems.
a) Forest resources: Use and over-exploitation: deforestation,case studies, Timber exploitation, mining, dams and their effectsand forests tribal people.
b) Water resources: Use and over-utilization of surface andground water, floods, drought, conflicts over water, dams-benefitsand problems.
c) Mineral resources: Use and exploitation, environmentaleffects of extracting and using mineral resources, casestudies.
d) Food resources: World food problems, changes, caused byagriculture and overgrazing, effects of modern agriculture,fertilizer-pesticide problems, water logging, salinity, casestudies.
e) Energy resources: Growing energy needs, renewable andnon-renewable energy sources, use of alternate energy sources; casestudies.
f) Land resources: Land as a resource, land degradation, maninduced landslides, soil erosion and desertification. Role of anindividual in conservation of natural resources. Equitable use ofresources for sustainable lifestyles.
UNIT- III Ecosystems:
Concept of an ecosystem. Structure and function of an ecosystem.Producers, consumers and decomposers. Energy flow in the ecosystem.Ecological succession. Food chains, food webs and ecologicalpyramids. Introduction, types, characteristic features, structureand function of the following eco-system:
a) Forest ecosystem. b) Grassland ecosystem. c) Desertecosystem. d) Aquatic ecosystems (ponds, streams, lakes, rivers,oceans, estuaries).
UNIT- IV Biodiversity and its conservations:
Introduction Definition: Genetic, species and ecosystemdiversity. Biogeographically classification of India. Value ofbiodiversity: consumptive use, productive use, social, ethical,aesthetic and option values. Biodiversity at global, National andlocal levels. India as a mega-diversity nation. Hot-spots ofbiodiversity. Threats to biodiversity: habitat loss, poaching ofwildlife, man-wildlife conflicts.
29
Endangered and endemic species of India.
UNIT V Environmental Pollution:
Definition, causes, effects and control, measures of:
a) Air pollution b) Water pollution c) Soil pollution d) Marinepollution e) Noise pollution f) Thermal Pollution g) Nuclearhazards Solid waste management: Causes effects and control measuresof urban and industrial wastes. Role of an individual in preventionof pollution. Pollution case studies. Disaster management: Floods,earthquake, cyclone and landslides.
UNIT VI Social issues and the Environment:
a) From unsustainable to sustainable development b) Urbanproblems related to energy c) Water conservation, rain waterharvesting, watershed management d) Resettlement and rehabilitationof people; its problems and concerns, case studies e) Environmentalethics: Issues and possible solutions f) Climate change, globalwarming, acid rain, ozone layer depletion, nuclear accidents andholocaust,
Case studies g) Wasteland reclamation h) Consumerism and wasteproducts i) Environment Protection Act j) Air (Prevention andControl of Pollution) Act k) Water (Prevention and Control ofPollution) Act l) Wildlife Protection Act m) Forest ConservationAct n) Issues involved in enforcement of environmental legislationo) Public awareness
UNIT VII Human population and the Environment. Populationgrowth, variation among nations. Population explosion FamilityWelfare Programme. Environment and human health. Human Rights.Value Education. HIV/ AIDS. Woman and Child Welfare. Role ofInformation Technology in Environment and human health. CaseStudies.
REFERENCES:
1. Agarwal, K.C. 2001, Environmental Biology, Nidi Pub. Ltd.Bikaner. 2. Bharucha, Franch, The Biodiversity of India, MapinPublishing Pvt. Ltd., Ahmedabad 380013, India . 3. Brunner R.C.1989, Hazardous Waste Incineration, Mc. Graw Hill Inc. 480p. 4.Clark R.S., Marine Pllution, Slanderson Press Oxford (TB). 5.Cunningham, W.P. Cooper, T.H. Gorhani, E & Hepworth, M.T. 2001,Environmental Encyclopedia, Jaico Pub. House,
Mumbai. 1195p. 6. De A.K., Environmenal Chemistry, Wiley EasternLtd.
30
7. Down to Earth, Centre for Science and Environment . 8.Gleick, H.P., 1993. Water in Crisis, Pacific Institute for Studiesin Dev., Environment & Security, Stockholm Env.
Institute, Oxford Univ., Press 473p. 9. Hawkins R.E.Encyclopedia of Indian Natural History, Bomaby Natural HistoryScociety, Bombay (R). 10. Heywood, V.H. & Watson, R.T. 1995.Global Biodiversity Assessment. Cambridge Univ. Press 1140p. 11.Jadhav, H & Bhosale, V.M. 1995, Environmental Protection andLaws, Himalaya Pub. House, Helhi 284p. 12. Mckinney, M.L. &Schoch, RM 1996, Environmental Sciences Systems & Solutions,Web enhanced Edition 639p. 13. Mhaskar A.K., Mater Hazardous,Tekchno-Sciences Publications (TB). 14. Miller T.G. Jr.Environmental Science, Wadsoworth Publishing Co. (TB). 15. Odum,E.P. 1971, Fundamentals of Ecology, W.B. Saunders Co. USA, 574p.16. Rao M.N. & Dutta, A.K. 1987, Waste Water Treatment. Oxford& IBH Publ. Co. Pvt. Ltd., 345p 17. Sharma, B.K., 2001,Environmental Chemistry, Goel Publ. House, Meerut. 18. Survey ofthe Environment, The Hindu (M). 19. Townsend C., Harper J, andMichael Begon, Essentials of Ecology, Blackwell Sciences (TB). 20.Trivedi, R.K., Handbook of Environmental Laws, Rules, Guidelines,Compliances and Standards, Vol. I and II Enviro
Mdiea (R). 21. Trividi R.K., Handbook of Environmental Laws,Rules, Guidelines, Compliances and Standards, Vol I and IIEnviro
Media (R). 22. Trividi R.K. and P.K. Goel, Introduction to airpollution, Techno Sciences Pub. (TB). 23. Wagner K.D., 1998,Environmental Management, W.B. Saunders Co. Philadelophia, USA499p. 24. A text bok environmental education G.V.S. Publishers byDr. J.P. Yadav.
(M) Magazine (R) Reference (TB) Textbook
Note: 1. Examiner will set eight questions. Students will berequired to attempt five Questions.
1. The awards of this paper shall not be counted in the award ofthe Degree/DMC.
31
ME - 101 ELEMENTS OF MECHANICAL ENGINEERING B. Tech. SemesterI/II (Common for all Branches)
L T P Credits Class Work : 50 Marks 3 1 -- 4 Examination :100Marks Total : 150 Marks Duration of Examination : 3 Hours
Unit-I: Properties of Steam & Boilers: Formation of steam atconstant pressure, Thermodynamics properties of steam, Condition ofsteam, Steam tables, Measurement of dryness fraction by throttlingcalorimeter, Classification of boilers, Comparison of water andfire tube boilers mounting and accessories with their functions,Constructional and operational details of Cochran and Babco*ck andWilcox boilers, Problems.
Unit-II: Steam Turbines and Condensers: Classification ofturbines, Working principle of impulse and reaction turbine,Compounding of impulse turbine, Comparison of impulse and reactionturbines, Types of condensers, Cooling ponds and cooling towers,Condenser and vacuum efficiencies.
Unit-III: I.C. Engines and Gas Turbines: Introduction,Classification, Constructional details and working of two-strokeand four-stroke diesel and petrol engines, Otto, Diesel and Dualcycles, Working principle of gas turbine, Constant pressure gasturbine cycle.
Unit-IV: Water Turbines, Pumps and Hydraulic Devices:Introduction, Classification, Construction details and working ofPelton, Francis and Kaplan turbines, Specific speed and selectionof turbines, Classification of water pumps and their working,Hydraulic jack and lift.
Unit-V: Simple Lifting Machines: Definition of machine, Velocityratio, Mechanical advantage, Efficiency, Laws of machines,Reversibility of machine, Wheel and axle, Differential pulleyblock, Single, double and triple start worm and worm wheel, Singleand double purchase winch crabs, Simple and compound screw jacks.Problems.
Unit-VI: Power Transmission Methods and Devices: Introduction toPower transmission, Belt drive, Rope drive, Chain drive, Pulley,Gear drive, Types of gears, Gear train, Clutches, Types andfunction of clutches, Types and function of brakes, Powermeasurement by dynamometer, Types of dynamometers.
Unit-VII: Stresses and Strains: Introduction, Concept &types of Stresses and strains, Poisons ratio, stresses and strainsin simple and compound bars under axial loading, Stress-straindiagrams, Hooks law, Elastic constants & their relationships,Principle stresses & strains and principal- planes, Mohrscircle of stresses. Numerical problems.
Unit-VIII: Bending Moment & Shear Force: Definitions, SF andBM diagrams for cantilever and simply supported beam. Calculationof maximum SF, BM and point of contra-flexure under the loads of(i) concentrated load (ii) uniformly distributed load (iii)combination of concentrated and uniformly distributed loads.Problems.
TEXT BOOKS:
1. Strength of Materials - G.H. Ryder, Pub.- ELBS. 2. Hydraulicand Fluid Mechanics Modi and Seth, Pub. Standard Book House, NewDelhi 3. Engineering Thermodynamics C.P. Arora, Pub. - TMH, NewDelhi 4. Thermal Engineering A.S. Sarad, Pub. - Satya Prakashan,New Delhi. 5. Engineering Mechanics K.L. Kumar, Pub. - TMH, NewDelhi. 6. Theory of Machines S.S. Rattan, Pub. TMH, New Delhi.
REFERENCE BOOKS:
1. Strength of Materials Popov, Pub. - PHI, New Delhi. 2.Hydraulic Machines Jagdish Lal, Pub.- Metropolitan, Allahbad. 3.Thermal Science and Engineering D.S. Kumar, Pub. Kateria &Sons, New Delhi.
Note: In the semester examination, the examiner will set eightquestions, at least one question from each unit. The students willbe required to attend only 5 questions.
32
ME - 105 ENGINEERING GRAPHICS AND DRAWING B. Tech. Semester I/II(Common for all Branches)
L T P Credits Class Work : 50 Marks -- -- 4 4 Examination :100Marks Total : 150 Marks Duration of Examination : 3 Hours
Unit-I Various types of projections, First and Third anglesystems of orthographic projections. Projection of Points indifferent quadrants.
Unit-II Projections of Straight Lines parallel to one or bothreference planes, contained by one or both planes, perpendicular toone of the planes, inclined to one plane but parallel to the otherplanes, inclined to both the planes, true length of a line and itsinclination with reference planes, traces of a line.
Unit-III Projections of Planes parallel to one reference plane,inclined to one plane but perpendicular to the other, inclined toboth reference planes.
Unit-IV Projections of Polyhedra Solids and Solids of Revolution- in simple positions with axis perpendicular to a plane, with axisparallel to both planes, with axis parallel to one plane andinclined to the other, Projections of sections of Prisms, Pyramids,Cylinders and Cones. True shape of section. Development of surfacesof various solids.
Unit-V Isometric projections - introduction, isometric scale,Isometric views of plane figures, prisms, pyramids andcylinders.
Unit-VI Orthographic drawings of Bolts and Nuts, Bolted Joints,Screw threads, Screwed Joints.
Unit-VII Free Hand Sketching - Orthographic Views fromIsometric, Views of Simple Machine Components such as Brackets,Bearing Blocks , Guiding Blocks and Simple Couplings.
Note: Some simple exercises may be attempted with AUTOCAD.
TEXT BOOKS:
2. Engineering Drawing Plane and Solid Geometry : N.D. Bhatt andV.M.Panchal, Forty-Fourth Edition 2002, Charotar PublishingHouse.
REFERENCE BOOKS:
1. Engineering Graphics and Drafting : P.S. Gill, MillenniumEdition, S.K. Kataria and Sons. 2. A Text Book of EngineeringDrawing : S.B. Mathur, Second Revised and Enlarged Edition 2000,Vikas Publishing
House. 3. Engineering Graphics using AUTOCAD 2000 : T.Jeyapoovan, First Edition 2002, Vikas Publishing House.
33
PHY - 103 PHYSICS LAB. - I B. Tech. Semester - I (Common for allBranches)
L T P Credits Class Work : 25 Marks -- -- 2 2 Examination :25Marks Total : 50 Marks Duration of Examination : 3 Hours
LIST OF EXPERIMENTS The experiments in 1st semester will bebased mainly upon optics, electrostatics, wave and oscillationswhich are
the parts of the theory syllabus of 1st semester.
1. To find the wavelength of sodium light by Newtons ringsexperiment.
2. To find the wavelength of sodium light by Fresnel's biprismexperiment.
3. To find the wavelength of various colours of white light withthe help of a plane transmission diffraction grating.
4. To find the refractive index and cauchy's constants of aprism by using spectrometer.
5. To find the wavelength of sodium light by Michelsoninterferometer.
6. To find the resolving power of a telescope.
7. To find the pitch of a screw using He-Ne laser.
8. To find the specific rotation of sugar solution by using apolarimeter.
9. To compare the capacitances of two capacitors by Desautybridge and hence to find the dielectric constant of a medium.
10. To find the flashing and quenching potentials of Argon andalso to find the capacitance of unknown capacitor.
11. To study the photoconducting cell and hence to verify theinverse square law.
12. To find the temperature co-efficient of resistance by usingplatinum resistance thermometer and Callender and Griffithbridge.
13. To find the frequency of A.C. mains by using sonometer.
14. To find the velocity of ultrasonic waves in non-conductingmedium by piezo-electric method.
RECOMMENDED BOOKS:
1. Advanced Practical Physics B.L. Worshnop and H.T. Flint (KPH)2. Practical Physics S.L.Gupta & V.Kumar (Pragati Prakashan).3. Advanced Practical Physics Vol.I & II Chauhan & Singh(Pragati Prakashan).
Note: Students will be required to perform atleast 10experiments out of the list in a semester.
34
ME - 107 WORKSHOP PRACTICE B. Tech. Semester I/II (Common forall Branches)
L T P Credits Class Work : 25 Marks -- -- 4 4 Examination :25Marks Total : 50 Marks Duration of Examination : 3 Hours
LIST OF EXPERIMENTS / JOBS
1. To study different types of measuring tools used in metrologyand determine least counts of vernier calipers, micrometers andvernier height gauges.
2. To study different types of machine tools ( lathe, shaper orplaner or slotter, milling, drilling machines).
3. To prepare a job on a lathe involving facing, outsideturning, taper turning, step turning, radius making andparting-off.
4. To study different types of fitting tools and marking toolsused in fitting practice.
5. To prepare lay out on a metal sheet by making and preparerectangular tray, pipe shaped components e.g. funnel.
6. To prepare joints for welding suitable for butt welding andlap welding.
7. To perform pipe welding.
8. To study various types of carpentry tools and prepare simpletypes of at least two wooden joints.
9. To prepare simple engineering components/ shapes byforging.
10. To prepare mold and core assembly, to put metal in the moldand fettle the casting.
11. To prepare horizontal surface/ vertical surface/ curvedsurface/ slots or V-grooves on a shaper/ planner.
12. To prepare a job involving side and face milling on amilling machine.
Note: 1. At least ten experiments/ jobs are to be performed/prepared by students in the semester.
2. At least 8 experiments/ jobs should be performed / preparedfrom the above list, remaining two may either be performed/prepared from the above list or designed and set as per the scopeof the syllabus of Manufacturing Processes.
35
CH - 103 CHEMISTRY LAB. B. Tech. Semester I/II (Common for allBranches)
L T P Credits Class Work : 25 Marks -- -- 2 2 Examination :25Marks Total : 50 Marks Duration of Examination : 3 Hours
LIST OF EXPERIMENTS
1. Determination of Ca++ and Mg++ hardness of water using EDTAsolution. 2. Determination of alkalinity of water sample.
3. Determination of dissolved oxygen (DO) in the given watersample.
4. To find the melting & eutectic point for a two componentsystem by using method of cooling curve.
5. Determination of viscosity of lubricant by Red Woodviscometer (No. 1 & No. 2).
6. To determine flash point & fire point of an oil by Pensky- Marten's flash point apparatus.
7. To prepare Phenol-formaldehyde and Urea formaldehyderesin.
8. To find out saponification No. of an oil.
9. Estimation of calcium in lime stone and dolomite.
10. Determination of concentration of KMnO4 solutionspectrophotometerically.
11. Determination of strength of HCl solution by titrating itagainst NaOH solution conductometerically.
12. To determine amount of sodium and potassium in a, givenwater sample by flame photometer.
13. Estimation of total iron in an iron alloy.
SUGGESTED BOOKS:
1. A Text Book on Experimental and Calculation EngineeringChemistry, S.S. Dara, S. Chand & Company (Ltd.) 2. Essential ofExperimental Engineering Chemistry, Shashi Chawla, Dhanpat RaiPublishing Company. 3. Theory & Practice Applied Chemistry O.P.Virmani, A.K. Narula (New Age)
Note: At least ten experiments are to be performed by thestudents.
36
CSE - 103 C PROGRAMMING LAB B. Tech. Semester I/II (Common forall Branches)
L T P Credits Class Work : 25 Marks -- -- 2 2 Examination :25Marks Total : 50 Marks Duration of Examination : 3 Hours
REPRESENTATIVE PROGRAMMING PROBLEMS: 1. Write a program to findthe largest of three numbers. (if-then-else)
2. Write a program to find the largest number out of ten numbers(for-statement)
3. Write a program to find the average mail height & averagefemale heights in the class (input is in form of sex code,height).
4. Write a program to find roots of quadratic equation usingfunctions and switch statements.
5. Write a program using arrays to find the largest and secondlargest no. out of given 50 nos.
6. Write a program to multiply two matrices.
7. Write a program to read a string and write it in reverseorder.
8. Write a program to concatenate two strings.
9. Write a program to sort numbers using the QuicksortAlgorithm.
10. Represent a deck of playing cards using arrays.
11. Write a program to check that the input string is apalindrome or not.
Note: At least 5 to 10 more exercises to be given by the teacherconcerned.
37
EE - 103 ELECTRICAL TECHNOLOGY LAB B. Tech. Semester I/II(Common for all Branches)
L T P Credits Class Work : 25 Marks -- -- 2 2 Examination :25Marks Total : 50 Marks Duration
![Chemical Engineering Syllabus DCRUST 2009- 2013 - [PDF Document] (2024)](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAEAAAABCAQAAAC1HAwCAAAAC0lEQVR42mP8/h8AAvMB+NzmkbcAAAAASUVORK5CYII=)