Smoked Beef Brisket Recipe | Whats Cooking America (2024)

What's Cooking America » Cooking Articles » Meat Recipe Collection » Beef » Beef Roast Recipes » Brisket » Smoked Brisket Recipe – How To Smoke A Brisket

  • Recipe
  • Comments
  • Print

Smoked Beef Brisket is the meat of choice for barbecuing in the great state of Texas. In fact, Smoked Brisket is considered the “National Dish of Texas.”

Briskets are a very tough piece of meat and difficult to eat unless it is cooked at a very low and slow temperature. When it’s cooked properly, a brisket will be “fall apart tender and delicious.” Smoking a brisket takes a lot of time and effort – but it is well worth the time as the final results are nothing less than spectacular!

In the United States, barbecuing is an outdoor social event that involves more than just eating.It is an opportunity for people to gather around to watch the meat cooking, smell the smoky flavors drifting in the air, and enjoy good company. Good barbecues will always lead to a great gathering! Keep in mind that smoking meat is considered more of an art and is not a precise science. This method of cooking meat requires practice and patience. Good barbeque cannot be rushed. So pop open a cold beer and invite some friends over to visit.

Smoked Brisket recipe and photos courtesy of Brenda Weller of Hillsboro, Oregon.

History of Brisket:

Brisket is the cut of meat from the lower chest of the cow which contains a lot of connective tissue. This cut of meat must be cooked properly in order to tenderize the connective tissue. According to the Random House Dictionary of the English Language, Second Edition, the term derives from the Middle English word brusket which comes from the earlier Old Norse brjk meaning cartilage.

In its earliest cooking form, to preserve the meat, colonial ancestors would cover brisket with salt crystals and age in a cool place for four days, creating what is known as corned beef which is still enjoyed by many today.

In the United States, brisket was considered a useless cut of meat that was ground up for chili’s, stew, or just thrown out for animal feed. The ranch owners would keep the best cuts of meat from the cows for themselves and the ranch hands would get the useless cuts of meats. This is how brisket became a meat staple in Texas. It was not until the 1950’s when German butchers put brisket in a smoker and cooked over low, indirect heat to create today what is known as Texas smoked beef brisket. In most barbecue lots in Texas, smoked beef brisket is served on a piece of butcher paper and accompanied with sausage.

History of Barbecue:

As the Spanish explorers arrived in the new world, they found the indigenous people of the Caribbean preserving meats in the sun. To keep the meat from spoiling and getting infested with bugs, they would build small, smoky fires and slowly cook the meat on racks above the fires. The natives of the West Indies called this process “barbacoa” which is generally believed to be the origin of the modern word Barbeque.

From the Republic of Barbecue: Stories Beyond the Brisket, by Elizabeth S. D. Engelhardt:

“American barbecue is the modern day evolution of cooking meat outdoors. As Europeans and Africans migrated to the Southern region of the United States, the process of barbecuing evolved. Europeans shipped over pigs and cattle to the new world to feed the colonies.

In the South, pork became the meat of choice since pigs required little care. Instead of drying meats on racks, pits and smoke houses were used. The process of slow cooking and smoking meats to achieve tenderness and flavor was used for the poorest and toughest cuts of meats that were left for slaves and lower income people. In the south, barbecue became an inexpensive food source.

What kind of meat to cook is largely debated depending on the area of the US. In the Carolinas and most of the south, pork is the meat of choice to barbeque (typically Boson butts and shoulder roasts), where in the state of Texas, beef is the only meet of choice (particularly brisket). If you go to Kansas City, MO, you will find pork ribs or in Western Kentucky, mutton is barbecued. Some of the rowdiest food fights in the United States involve barbecue. Claims of territory, boundary drawing, and quasi-religious testifying break out over slow-cooked meats.”

Sources:
The History of Barbeque: Part 1” and “True Barbeque” by Derrick Riches
“German Barbeque” by Derrick Riches
Republic of Barbecue by Elizabeth S. D. Engelhardt

Check out all of Linda’s Beef Recipes using various cuts of beef.

How To Smoke A Brisket Recipe:

As you research and talk to people about smoking methods for brisket, you will find varying opinions about the proper way to smoke a brisket. My son-in-law, Ben Weller of Hillsboro, Oregon, loves to smoke briskets, and after much practice, he has developed his tried and true technique for a tender, juicy brisket.

1 (8 to 12 pound) untrimmed beef brisket, chilled
Olive Oil
Dry Rub (see recipe below)
Brine (see recipe below)
Apple Cider or Juice (see Finish Cooking the Brisket below)

Purchasing Brisket:

Large cuts of brisket can be easily found in a restaurant supply grocery store. Look for a piece of brisket that is dark red in color, feels tender, and springs back to the touch. It is not recommended to use brisket that has been frozen as the the meat will not turn out tender when cooked. If the brisket feels stiff or flops over, then it’s a good indicator that it was previously frozen – do not purchase.

Look for a brisket that has a good layer of fat at the tip of the brisket (this is called the fat cap) and you also want to see that the fat is marbled throughout the entire cut of brisket. Look for a brisket that is laced with fat all over, as it will cook to fall-apart tender, which is the result that you want to achieve. The fat should appear bright white in color. If it has a yellowish appearance, then it’s not a fresh cut of meat.

It is recommended to buy a brisket between 8 to 12 pounds to feed a large group. Any smaller than 8 pounds, and the brisket will cook too quickly. Calculate about 1 pound of meat or more per person.

Preparing Brisket:

Start preparing the brisket the day before you plan to barbecue.


Step 1 – Trim the fat cap off the brisket:

Trim down to 1/4-inch to ensure the smoke is able to penetrate the meat. If the fat cap is too thick, the brisket will not cook evenly. If the fat is completely cut off, you will lose the flavor. The surface fat and the marbling melt as the brisket smokes, marinating the meat and keeping it moist. If any bits of muscle seem grey or dry, cut them off and discard.

Step 2 – Tenderize the meat:

You can soak the brisket in a marinade or use a mix of spices to rub into the brisket to help tenderize the meat. With either method, it is recommended to let the brisket sit in a marinade or rub overnight, in the refrigerator, to tenderize. My son-in-law likes to rub a spice mix into the brisket and then inject with a brine that will leave the meat both tender and juicy.

Dry Rub Ingredients Recipe:
A store bought rub can be used to rub into the meat or you can use the following ingredients to make your own rub mix:

Olive Oil
1/4 cup coarse kosher salt
1/4 cup whole black peppercorns
1/4 cup of your favorite steak seasoning

Grind up the salt, peppercorns, and steak seasoning until they reach a fine powder consistency. The grinding can be done using a few different options – by hand using mortar and pestle, with a coffee grinder (cleaned out) or a small blender can be used.

Place the brisket in a roasting pan fat side up. Rub olive oil over entire brisket until evenly coated. The olive oil will help the spice rub mixture cling to the meat and the spices will penetrate better while cooking. Rub the spice mixture into the brisket until the entire brisket is covered with the rub. If more rub is needed to cover meat, then make another batch of rub.

It is important to make sure the entire brisket is completely covered with the spice rub mixture to help seal in the juices and add a wonderful flavor to the meat. The key is to use equal amounts of ingredients in this rub mix.

Step 3 – Inject the brisket with brine:


Brine Ingredients:

2 teaspoons beef bouillon*
2 cups hot water

* Beef broth can be used as alternative

In a small bowl, add beef bouillon. Pour hot water over beef bouillon and stir until bouillon is dissolved.

Make sure your Marinade Injector (which looks like an over sized syringe) is first washed out and rinsed before using. Place the needle of the injector into the brine and gently and slowly pull up on the plunger. Next, insert the injector needle into the brisket and push down on the plunger to distribute the brine deep into the meat. Repeat this process covering all sections of the brisket.


Smoking the Brisket:

Preheat Smoker Grill to 170 degrees F. Cooking at a low temperature will make the wood smoke more.

Place the brisket (in roasting pan) in the smoker and close the smoker lid. Smoke the brisket for 1 hour for every pound of meat or smoke overnight. As the smoke is penetrating the brisket meat during the smoking phase, it will build up a pink smoke ring around the outer edges of the brisket.

Finish cooking the brisket:

Turn up the temperature of the smoker grill to 180 degrees F.

Pour 1 1/2 to 2 cups of apple cider or apple juice into the roasting pan until entire bottom of roasting pan is covered with the liquid.

Insert the meat thermometer probe into the center of the brisket. Cover the pan with two (2) layers of aluminum foil and make sure the foil is tightly sealed around the roasting pan. This will help trap the moisture around the brisket so it can steam during the cooking process to keep it moist. Let the cable of the meat thermometer probe hang outside the smoker and close the smoker lid.


Cook the brisket up to an internal temperature of 200 degrees F. and maintain this temperature in the meat for several hours while cooking. This low heat will help break down the tissues in the meat to tenderize while cooking. Not all briskets are created equally, so the cooking time will vary. This final stage of cooking the brisket can take four (4) hours or more. Do not raise the lid of the smoker any more than you absolutely need to (it reduces the temperature inside every time you do).

Troubleshooting tip: If the internal temperature of the brisket starts to rise over 200 degrees F., turn down the smoker temperature heat if you are not yet ready to serve. If the temperature of the meat does not cool down to 200 degrees or lower, then turn off the smoker! You will need to constantly monitor the temperature of the brisket while it is cooking.

Take the brisket off the smoker at least 30 minutes before your ready to serve. Remove the brisket from the roasting pan and let rest at least 30 minutes to keep the juices in.

It is important to use a meat thermometerwith a cable attached to the meat probe tip. This will allow for the meat probe tip to stay in the Prime Rib during the entire cooking process while the barbecuelid is closed, giving you a continuous temperature reading of the meat to ensure it does not overcook. I recommend using theThermoworks Smoke Pro Series 2 Channel High Temp Cooking Probefor continuous monitoring of the meat’sinternal temperaturein addition to monitoring the smoker’s internal temperatureduring the smoking and cooking process. Includes wireless receiver to remotely monitor the temperatures from up to 300 feet away.

New! Thermoworks Signals™ 4-Channel Wi-Fi/Bluetooth BBQ Alarm Thermometerwith built-in Wi-Fi and Bluetooth that can seamlessly switch between the two. Signals boasts 4 channels of continuous temperature monitoring and real-time alerts whether your nearby or across town. Works with both your smart device AND as a stand-alone unit with physical buttons.

Sponsored Content

Slicing the Brisket:

Do not slice until the last possible minute. Brisket dries out quickly once it is cut.

When ready to serve, using a sharp knife, slice/carve brisket against the grain. Working from the thin, square end of the brisket, cut long thin slices about the thickness of a pencil. If the smoked beef brisket is a little tough, cut it thinner. If the brisket starts to fall apart cut the slices thicker. As you work your way along, trim off any large pieces of fat and discard. Collect any juice and pour it over the sliced meat. The smoked beef brisket can be served alone or on sandwich buns.

Tips for smoking brisket on a grill when you don’t have a smoker:

If you do not have the means to buy a smoker, a smoking effect can be achieved using a grill. Use the “indirect” heat method of cooking on a grill, by pushing all the coals to one side of the grill, or if using a gas grill, only light one side of the grill. The brisket should sit on the side of the grill with no fire underneath.

Soak hardwood chips in water for at least one hour and place over fire. These will product the smoke to flavor the meats and add the moisture to keep the meat from drying out.

Add a drip pan below where the meat will sit, to catch the fat that will be dripping off the meat.

Try to maintain a grill temperature as close to 200 degrees F, as possible.

Baste the meat while cooking to keep the meat moist and add extra flavor. Try not to baste more than once an hour since you will lose smoke every time the grill is opened.

Comments and Question from Readers:

I do not see, anywhere in your recipe, where the temperature of the smoker goes above 180°F. How is the brisket going to be able to develop an internal temperature of 200°F if the smoker doesn’t develop at least that much heat? – Dave (6/25/14)

Answer – Per Ben Weller: Smokers are not like an oven where you can lock in the temperature. 180 degrees F. is a typical low heat setting for most smokers some brand of smoker may vary slightly so you have to play around with the temperature setting. With that said, even though the heat for the smoker is set at 180 F., the internal temperature of the smoker can easily get hotter from the fire causing the temperature of the meat to rise beyond 180 degrees F. while cooking. That is why it is critical to constantly monitor the internal temperature of the brisket to ensure it does not rise above 200 degrees F. so it cooks low and slow. The brisket is done when the meat is fall apart tender.

Troubleshooting tips:

If the internal temperature of the brisket starts to rise over 200 degrees F., turn down the smoker temperature heat if you are not yet ready to serve. If the temperature of the meat does not cool down to 200 degrees or lower, then turn off the smoker! You will need to constantly monitor the temperature of the brisket while it’s cooking.

Every smoker can vary in temperature settings. In our example, we are using a pellet grill smoker. We set the smoker to 180 degrees F. for the final cooking process, but the internal temperature of the smoker with the lid closed can produce a higher heat which will cook the brisket up to 200 degrees F. You will have to play with your smoker grill temperatures to find the setting that works best that will bring the meat temperature up to 200 degrees F. There is some debate that the smoker temperature needs to be between 200 to 225 degrees F., but if your brisket temperature starts rising over 200 degrees F, then turn down the smoker temperature. Remember the cooking process must be “low and slow”.

Related Recipes

Categories:

Beef History Brisket Cooking Lessons - Cooking 101 Passover Smoked Beef Southwest Beef Recipes Southwest Food History Tex Mex

Comments and Reviews

Smoked Beef Brisket Recipe | Whats Cooking America (2024)

FAQs

What is the secret to the perfect smoked brisket? ›

Prepare the smoker for a long cook

Before you start smoking your brisket, you need to make sure that your smoker is set up properly. The temperature of the smoker should be between 225 and 250 degrees Fahrenheit. It is recommended to smoke one pound of brisket for 1 hour and 30 minutes at 225 degrees Fahrenheit.

How long to smoke a 4 lb brisket at 225? ›

A: You can usually figure about 1.5 hours per pound at 225 degrees for brisket, pork shoulder and other larger pieces of meat. Several things can affect this time such as actual meat thickness, wind, temperature and how often you open the door of the smoker.

How to make the most tender smoked brisket? ›

Once your smoker is maintaining 200 degrees, you are ready to place the brisket in the smoker. Place the brisket directly on the smoker grate with the fat side down. Maintain 200°F throughout and keep the smoke going for at least 6 hours if you are not using a stick burner. If you have a water pan, use it.

Does brisket get more tender the longer you smoke it? ›

SMOKING A 3 POUND BRISKET

A 3-pound brisket will typically require 5-6 hours of smoking at the base temperature of 250° F to reach full doneness. If you have more time, you can lower the temperature for a more tender, fall-apart texture.

What do you soak a brisket in before smoking it? ›

Dissolve the salt and sugar in the boiling water. Add the ice, then let cool to room temperature. Place the brisket in the brine and cover. Transfer to the refrigerator to brine overnight.

How long to smoke a brisket to make it tender? ›

Close the lid on the smoker and, maintaining 225 degrees F, continue cooking until the internal temperature of the brisket reaches 202 degrees F in the thickest part of the meat (takes anywhere from 5-8 hours). Remove the brisket to a large cutting board and allow to rest for 1 hour before slicing.

What temp is brisket most tender? ›

The brisket is at its most tender when it reaches an internal temperature of around 195 to 205°F (90 to 96°C). However, the exact temperature for peak tenderness can vary based on factors like the cooking method, the grade of the meat, and personal preference.

Does apple cider vinegar tenderize brisket? ›

Pour apple cider vinegar over the brisket. The vinegar will help tenderize the meat and will add sweetness to it. Proper brisket should be cooked low and slow in a smoker, using wood or charcoal.

How to smoke a brisket for beginners? ›

Load up your charcoal as full as you can. Use a water tray to keep moisture in the smoker. Smoke at 275 degrees for 6/hrs. You are looking for 180 degrees internal temp after the stall and after the bark has formed, wrap (See the next section for the wrap guide) and put back on the smoker until 202-205 - pull it.

When should I wrap my brisket? ›

Monitor Temperature: Cook the brisket until it reaches the stall phase, typically around 160-170°F (71-77°C). Wrap the Brisket: Remove the brisket from the heat source and wrap it tightly in butcher paper. Make sure to create a secure seal to prevent moisture from escaping.

How often do you spritz brisket? ›

Keeping a water pan in the smoker is the best way to retain moisture. After the first 2-3 hours start spritzing your brisket with water, apple juice, hot sauce or apple cider vinegar every 30 minutes to an hour. This helps keep it moist and stops it from burning.

How do you make a super moist brisket? ›

For the most tender brisket possible, we need to go low and slow. We also need a moisture strategy... Fully wrap your brisket in heavy duty tin foil with the fat cap facing up. This helps ensure the brisket will stay very moist.

What causes a smoked brisket to be tough? ›

Brisket contains a lot of connective tissue, which can make it tough. The type of connective tissue in brisket is called collagen. Cook the meat quickly and you get tough, dry meat. Cook a brisket slowly, with some liquid, and the collagen turns into gelatin.

Why is my smoked brisket dry and tough? ›

It's more likely that a dry brisket is overcooked, rather than under, but the dryness can also be the result of improper seasoning or particularly low fat marbling. Not to mention, brisket usually is cooked to like, 180ºF, so overcooking it takes quite a bit of effort/negligence.

How do you make brisket more flavorful? ›

The day before you plan to cook the brisket, apply a generous amount of brisket rub on all sides of meat and refrigerate overnight. The rub will not only enhance the flavor of the meat, but tenderize it as well. Similar to rubs, the meat should soak overnight in the marinade for maximum flavor absorption.

How long should you season a brisket before smoking? ›

It doesn't happen just by sprinkling some salt on it. You need to allow the brisket to sit and really absorb those flavors...for at least the next 12 hours. And so, if you're looking to make a brisket at your house run... like you need to have space in a cooler or your refrigerator.

References

Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated:

Views: 5588

Rating: 5 / 5 (70 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.